PREempt HLD5 is a 2% Accelerated Hydrogen Peroxide® (AHP®) solution designed for use in instrument and device reprocessing of semi-critical and critical devices where rapid contact times and high level disinfection are required. PREempt HLD5 is a high level disinfectant with a 5 minute contact time against bacteria, viruses, fungi and mycobacteria.
PREempt HLD5 is a high level disinfectant and sterilant for processing heat sensitive semi-critical and critical medical devices and instruments for which heat sterilization is not suitable.
5 minute contact time against bacteria, viruses and fungi
Contains hydrogen peroxide which converts to water and oxygen
Designed for use on heat sensitive semi-critical & critical devices
Product can be reused for 14 days after decanting
No special ventilation required
How to Use
High Level Disinfection:
Place pre-cleaned, rinsed and dried devices and instruments in solution of undiluted PREemptTM HLD5 TM
Allow devices to soak for at least 5 minutes
Remove and rinse with sterile water or potable tap-water
Sterilization:
Place pre-cleaned, rinsed and dried devices and instruments in solution of undiluted PREemptTM HLD5 TM
Allow devices to soak for at least 6 hours
Remove and rinse with sterile water
AHP2 TEST STRIPS
AHP2 Indicator Strips were designed specifically for use with PREemptTM HLD5TM to indicate the correct concentration of active
The Hydrogen Peroxide concentration of PREemptTM HLD5TM solution during its use-life can be verified by the 2% AHP® test strip (Part No. AHP2)
PREemptTM HLD5TM solution may be used and reused for up to a maximum of 14 days provided the 2% AHP® test strip indicates a pass according to the instructions
